<code id="5npzl"></code><tr id="5npzl"></tr>
    <strike id="5npzl"></strike>

      <code id="5npzl"></code>
      <th id="5npzl"><video id="5npzl"></video></th>

      <object id="5npzl"></object>
      • 产品名称: ACP 6000
      • 产品编号: 柔性AC电流传感器 ACP 6000
      • 产品概况 ACP 6000The ACP 6000_3 is an AC current Probe utilising the Rogowskiprinciple. It can be used to measure currents up to 6000 Amps fromvery low frequencies to 10kHz.The flexible and lightweight measuring head allows quick and easyinstallation in hard to reach areas and with large conductors.

      ACP 6000

      The ACP 6000_3 is an AC current Probe utilising the Rogowski

      principle. It can be used to measure currents up to 6000 Amps from

      very low frequencies to 10kHz.

      The flexible and lightweight measuring head allows quick and easy

      installation in hard to reach areas and with large conductors.

      ACP 6000

      Electrical Characteristics

      Current Ranges (selectable via rotary switch) .......... : 60A / 600A / 6000A ACRMS

      Output Sensitivity (AC coupled) ................................ : 50mV / 5mV / 0.5mV per A

      Accuracy (at 25°C) .................................................... : ± 1% of reading ± 0.1A (60A range)

      ................................................................................... : ± 1% of reading ± 1A (600A / 6000A range)

      Load Impedance ........................................................ : 100kΩ minimum

      Linearity (10% to 100% of range) ............................. : ± 0.2% of reading

      Noise ......................................................................... : 80mA (60A) / 400mA (600A / 6000A range)

      Bandwidth (-1dB) ....................................................... : 10Hz to 10kHz

      Phase Error (45 – 65Hz) ........................................... : ± <1º

      Temperature Coefficient ............................................ : ± 0.1% of reading / °C

      Position Sensitivity .................................................... : ± 2% of reading

      External Field (with cable > 100mm from the head) . : ± 0.2% of range

      Power Supply ............................................................ : 2 x AA MN 1500 LR6 Alkaline

      ................................................................................... : 2000 hours, low battery indicator

      ................................................................................... : external power supply (3V / 100mA)

      Overload Indication ................................................... : Red LED ON indicates the range overload

      Working Voltage (see Safety Standards section) ..... : 1000V AC RMS or DC (Probe and Integrator)

      ................................................................................... : 30V max (Output)

      ACP 6000

      General Characteristics

      Probe and Cable Material ......................................... : Alcryn 2070 NC, LATENE 7H2W V0

      Probe Cable Length (s) ............................................. : 610mm (24”) / 915mm (36”) / 1220mm (48”) / 2490mm (98”)

      Probe Cable Diameter ............................................... : 9.9 mm (nominal)

      Cable Length (Probe to Integrator box) .................... : 2 m

      Output ........................................................................ : 0.5m long lead terminated with

      ................................................................................... : a safety male BNC

      Operating Temperature Range ................................. : -20 to +65°C

      Storage Temperature Range .................................... : -40 to +75°C

      Operating Humidity.................................................... : 15% to 85% (non condensing)

      Degree of protection .................................................. : IP65 Probe, IP40 Integrator module

      Colour ........................................................................ : RAL 120 70 75 Lemon green,

      华夏彩票app-官网|A爱彩